I can happily play about with settings and see the difference. Very interested to note that by unloading and reloading the adapter module with suggested options it won't connect. Int_clear=0 disable interrupt clear before set (default 1) Msi=1 Set to 1 to use MSI interrupts mode (default 1) Rtw_enusbss=0 disables USB autosuspend (only for USB adapters)ĭisable_watchdog=1 disable watchdog errors
Realtek rtl8821ae driver linux software#
Swlps=1 enables software control of power savingįwlps=0 disables firmware control of power saving Swenc=1 enables software encryption (prefered) Reboot after making any changes to the options in the nf file. You can also try flipping 1 to 0, or, 0 to 1, to reverse enabling/disabling individual option settings. Placing a comment ("#") in front of any option will disable the option. Simply remove the "#" sign in front of any option to enable that option. You can test any of the other driver options in /etc/modprobe.d/nf by uncommenting the entry. etc/modprobe.d/nfĬopy and paste the following contents into the conf file: options rtl8821ae swenc=1 This will alter the options of your driver temporarily until you reboot.įor a more permanent change to your adapters options you must create a driver configuration file.Ĭreate the following Realtek rtlwifi driver configuration file. Reload the adapter module with software encryption enabled & power saving disabled. Unload the adapter module: sudo modprobe -r rtl8821ae You could try this test to see if it improves your wifi's connection. Given that the above says it's RTL8812ae, would I be looking for firmware that doesn't even exist? Or should I try installing something from the AUR that might help? Some of those are for a USB card which obviously mine isn't. I ask here because I see discussion of an RTL8812AU package and its variants. In light of the fact that this chip isn't properly supported in Linux anyway (from what I can read) do I just live with things as they are and accept they won't improve (barring my ISP actually managing to make the network run properly!!!)? My question is simply this: is there anything I could change? I note that it's asking for the 8812 firmware but falling back to 8821. rtlwifi: Loading alternative firmware rtlwifi/rtl8821aefw.bin rtl8821ae 0000:06:00.0: Direct firmware load for rtlwifi/rtl8812aefw.bin failed with error -2
rtl8821ae 0000:06:00.0: Direct firmware load for rtlwifi/rtl8812aefw_wowlan.bin failed with error -2 rtl8821ae: Using firmware rtlwifi/rtl8812aefw_wowlan.bin rtl8821ae: Using firmware rtlwifi/rtl8812aefw.bin So I did a bit of digging around, and dmesg | grep firmware gives me: Spectre V2 : Enabling Restricted Speculation for firmware calls While it's improved but not entirely stopped the random disconnects, page loading can sometimes slow to a crawl or stop entirely. I've just purchased and installed a D-Link DWA-582 network card. Having encountered some HUGELY frustrating issues of late with my wifi also constantly disconnecting, I decided to replace the internal PCIe card.
Realtek rtl8821ae driver linux free#
Not sure if this is the right place for my question - please feel free to move appropriately. Sensors: System Temperatures: cpu: 0.0C mobo: N/A gpu: 0.0 ID-1: /dev/sda model: SAMSUNG_HM160HI size: 160.0GB IF: wlp1s0 state: down mac: c8:3d:d4:6b:78:d9Ĭard-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller Network: Card-1: Realtek RTL8821AE 802.11ac PCIe Wireless Network Adapter Sound: Advanced Linux Sound Architecture v: k4.12.8-2-MANJARO Resolution: renderer: Gallium 0.4 on AMD CARRIZO (DRM 3.15.0 / 4.12.8-2-MANJARO, LLVM 4.0.1)Īudio: Card-1 Advanced Micro Devices Device 157aĬard-2 Advanced Micro Devices Kabini HDMI/DP Audio Graphics: Card: Advanced Micro Devices Carrizoĭisplay Server: x11 (X.Org 1.19.3) driver: amdgpu Machine: Device: laptop System: LENOVO product: 80ST v: Lenovo ideapad 310-15ABR Wifi disconnects all the time and wont reconnect back.
0 kommentar(er)
